My cart:
0
Your cart is currently empty.
Description
Adhesive for glass with glass and glass with metal. The curing process under UV-light requires few seconds and results in a strong and invisible bond. Suited for furniture, decorative objects etc.
Properties & Polymerization
The glass (or metal) needs to be thoroughly cleaned and dried prior to proceeding with the glue. The degree of the polymerization depends on the intensity and the distance of the UV-light source, the thickness of the bond as well as the light transmission of the
materials. We recommend using a UV-Lamp with a wave length of 365 to 420 nm with a power of approx. 100mW/cm2.
The curing times can vary with the thickness of the bond.
Storing
Keep in a dry space at max. 25°C. Avoid contamination – do not put back spilled or superfluous material back into the bottle.
Safety Aspects
When the UV-Lamp is switched on, wear eye protection with UV-filter.
| Application: | Specially strong, e.g. for metal fixtures on shower cabins, light signals etc. |
|---|---|
|
Viscosity: |
5000 – 80000 |
| Gap Filling Capacity: | 0.03/1.5 mm |
| Curing Time: | 5– 10 seconds |
| Colour: | Transparent |
| Light Transmission: | > 98% |
|
Resistance to humidity at 40°C: |
Excellent |
900.386
10593 0.075000
Related Products (There are 16 other products in the same category)
Customers who bought this product also bought:
Hxtal NYL-1 - A & B Kit - 110g
CHF139.83
 |
This product is only supplied to persons over 18 years of age. An age check will/may be carried out after the order has been placed. |
 |
Additional shipping costs (+ CHF 2.00) apply to this product, as it must be sent registered according to the Chemicals Act. |
