Kit de Suspension pour Miroir

For all mirror sizes (per m² area = 1 piece) up to max. 2 m² of 3mm glass or 1 m² of 6mm glass.

Set consists of:
- 1 mirror hanging device
- 2 -component Glue with wooden spatula for mixing
- 2 special cover tapes
- 1 screw with dowel
- Self-adhesive pads as spacers

Detailed instructions

Note: The area where the hanger is to be fixed must be thoroughly cleaned. Do not hang your mirror for 48 hours after attaching the hanger to the back - this will allow time for the adhesive to cure. The weight that a single hanger will hold is dependent on the structure of the wall on which it is hung and Creative Glass accept no responsibility for any damage or loss incurred by use of this product. On a good wall this product is capable of holding 25kg.