Creative Ceramics Moulds for Fusing, Slumping & Casting
Focal piece for a corporate environment, reception room or any larger space or it could be used as fruit bowl etc.
Try to fuse identical squares from two contrasting colours, total thickness 6 mm minimum. The steep angle of this mould will reveal the bottom colour on the side. The sides will tend to pull in and give a more natural feeling to this large and solid shape.
Recommended Firing Chart
Please Read: This firing recommendation has been calculated for use with Bullseye Glass of average viscosity with an even thickness of 4 - 6 mm. The chart shown below is also based on the assumption that you are using a top fired kiln, e.g. Paragon GL22, GL24, BVD Flat bed kilns etc. If you are using a side firing kiln you must allow more time in the first ramp.